Tuesday, October 02, 2007

End of Season Statistics, 2007

For the past several years I have been posting Excel spreadsheets with sabermetric stats like RC for regular players on my website. I have not been doing this because I think it is a unique thing that nobody else does--Hardball Times, Baseball Prospectus, and other sites have similar data available. However, since I figure my own stats for myself anyway, I figured I might as well post it on the net.

This year, I am not putting out Excel spreadsheets, but I will have Google Spreadsheets that I will link to from both this blog and my site. What I wanted to do here is a quick run down of the methodology used.

First, I should acknowledge that the primary data source is Doug’s Stats, and that park data for past seasons comes from KJOK’s park database. The Baseball Direct Scoreboard and ESPN.com round out the sources.

The general philosophy of these stats is to do what is easiest while not being too imprecise, unless you can do something just a little bit more complex and be more precise. This in practice is a subjective standard. For instance, R^2/(R^2 + RA^2) is pretty close, and Pythagenpat is a bit more work, but I used Pythagenpat. On the other hand, using ERP as the run estimator is not optimal--I could, in lieu of having empirical linear weights for 2007, use Base Runs or another approach to generate custom linear weights. I have decided that does not constitute a worthwhile improvement. Others might disagree, and that’s all right. I’m not claiming that any of these numbers are the state of the art or cannot be improved upon.

First, the team report. I list Park Factor (PF), Winning %, Expected Winning % (EW%), Predicted Winning % (PW%), Wins, Losses, Runs, Runs Allowed, Runs Created (RC), Runs Created Allowed (RCA), Runs/Game (R/G), Runs Allowed/Game (RA/G), Runs Created per Game (RCG), and Runs Created Allowed per Game (RCAG):

EW% is based on runs and runs allowed in Pythagenpat, with the exponent = RPG^.29. PW% is based on runs created and runs created allowed in Pythagenpat.

Runs Created and Runs Created Allowed are both based on a simple Base Runs formula. For the offense, the formula is:
A = H + W - HR - CS
B = (2TB - H - 4HR + .05W + 1.5SB)*.76
C = AB - H
D = HR
For the defense:
A = H + W - HR
B = (2TB - H - 4HR + .05W)*.78
C = AB - H (approximated as IP*2.82)
D = HR
Of course, these are both put together, like all BsR, as A*B/(B + C) + D. The only difference between the formulas is that I include SB and CS for the offense, but don’t want to waste time scrounging up stolen bases allowed for the defense.

R/G, RA/G, RCG, and RCAG are all calculated straightforwardly by dividing by games, then park adjusted by dividing by park factor. Ideally, you use outs as the denominator, but for teams, outs and games are so closely related that I don’t think it’s worth the extra effort.

Next, we have park factors. I have explained the methodology used to figure the PFs before, but the cliff’s notes version is that they are based on five years of data when applicable, include both runs scored and allowed, and they are regressed towards average (PF = 1), with the amount of regression varying based on the number of years of data used. There are factors for both runs and home runs. The initial PF (unshown) is:
iPF = (H*T/(R*(T - 1) + H) + 1)/2
where H = RPG in home games, R = RPG in road games, T = # teams in league (14 for AL and 16 for NL). Then the iPF is converted to the PF by taking 1- (1-iPF)*x, where x = .6 if one year of data is used, .7 for 2, .8 for 3, and .9 for 4+.

It is important to note, since there always seems to be confusion about this, that these park factors already incorporate the fact that the average player plays 50% on the road and 50% at home. That is what the adding one and dividing by 2 in the iPF is all about. So if I list Fenway Park with a 1.02 PF, that means that it actually increases RPG by 4%.

In the calculation of the PFs, I did not get picky and take out “home” games, like the three games in Milwaukee and one in Seattle that the Indians played (actually, the Baseball Direct data counted the SEA game as a road game, so there are only three phantom home games). They simply don’t cause that big of a problem. Suppose Jacobs’ Field was a perfectly average park in a league in which there are 4.8 runs/game. At 81 home and road games per year, in the previous four years the Indians and their opponents would have scored 3110.4 runs at home and on the road.

If this season, the Indians played four “home” games in an extreme environment in which say 20 runs were scored per game, they would have 819.2 runs added in to the home total. The road games would contribute 777.6 runs to the five-year total. Now, for the five years the Indians’ home games would have a total of 9.70272 RPG versus 9.6 for the road games. The park factor, when fully figured with the regression factor would be 1.0045, when we know that it should be 1.0000. I’m not going to spend too much time worrying about that kind of discrepancy, and that’s a high end example of what the discrepancy would actually be.

Next is the relief pitchers report. I defined a starting pitcher as one with 15 or more starts. All other pitchers are eligible to be included as a reliever. If a pitcher has 40 appearances, then they are included. Additionally, if a pitcher has 50 innings and less than 50% of his appearances are starts, he is also included here (this allows some swingmen type pitchers who wouldn’t meet either the minimum start or appearance standards to get in).

For all of the player reports, ages are based on simply subtracting their year of birth from 2007. I realize that this is not compatible with how ages are usually listed and so “Age 27” doesn’t necessarily correspond to age 27 as I list it, but it makes everything a heckuva lot easier, and I am more interested in comparing the ages of the players to their contemporaries, for which case it makes very little difference.

Anyway, for relievers, the statistical categories are Games, Innings Pitched, Run Average (RA), Relief Run Average (RRA), Earned Run Average (ERA), Estimated Run Average (eRA), Fielding-Independent Pitching (FIP), Guess-Future (G-F), Inherited Runners per Game (IR/G), Inherited Runs Saved (IRSV), hits per ball in play (%H), Runs Above Average (RAA), and Runs Above Replacement (RAR).

All of the run averages are park adjusted. RA is R*9/IP, and you know ERA. Relief Run Average subtracts IRSV from runs allowed, and thus is (R - IRSV)*9/IP; it was published in By the Numbers by Sky Andrecheck. eRA, FIP, %H, and RAA will be explained in the starters section, and is the invention of Tango Tiger (FIP, that is).

Guess-Future is a JUNK STAT. G-F is A JUNK STAT. I just wanted to make that clear so that no anonymous commentator posts that without any explanation. It is just something that I have used for some time that combines eRA and strikeout rate into a unitless number. As a rule of thumb, anything under 4 is pretty good. I include it not because I think it is meaningful, but because it is a number that I have been looking at for some time and still like to, despite the fact that it is a JUNK STAT. JUNK STATS can be fun as long as you recognize them for what they are. G-F = 4.46 + .095(eRA) - .113(KG), where KG is strikeouts per 9 innings. JUNK STAT JUNK STAT JUNK STAT JUNK STAT JUNK STAT

Inherited Runners per Game is per relief appearance (G - GS); it is an interesting thing to look at, I think. You can see which closers come in with runners on base, and which are used nearly exclusively to start innings. Of course, you can’t infer too much; there are bad relievers who come in with a lot of people on base, not because they are being used in high leverage situations, but because they are long men or what have you. I think it’s interesting, so I include it.

Inherited Runs Saved is the difference between the number of inherited runs the reliever allowed to score, subtracted from the number of inherited runs an average reliever would have allowed to score, given the same number of inherited runners. I do not park adjust this figure. Of course, the way I am doing it is without regard to which base the runners were on, which of course is a very important thing to know. Obviously, with a lot of these reliever measures, if you have access to WPA and LI data and the like, that will probably be more significant.

IRSV = Inherited Runners*League % Stranded - Inherited Runs Scored

Runs Above Replacement is a comparison of the pitcher to a replacement level reliever, which is assumed to be a .450 pitcher, or as I would prefer to say, one who allows runs at 111% of the league average. So the formula is (1.11*N - RRA)*IP/9, where N is league runs/game. Runs Above Average is simply (N - RRA)*IP/9.

On to the starting pitchers. The categories are Innings Pitched, Run Average, ERA, eRA, FIP, KG, G-F, %H, Neutral W% (NW%), Quality Start% (QS%), RAA, and RAR.

The run averages (RA, ERA, eRA, FIP) are all park-adjusted, simply by dividing by park factor.

eRA is figured by plugging the pitcher’s stats into the Base Runs formula above (the one not including SB and CS that is used for estimating team runs allowed), multiplying the estimated runs by nine and dividing by innings. FIP, a DIPS-approximator invented by Tango Tiger, is simply (13*HR + 3*W - 2*K)/IP, plus a constant to make it equal RA on the league level.

Neutral Winning Percentage is the pitcher’s winning percentage adjusted for the quality of his team. It makes the assumption that all teams are perfectly balanced between offense and defense, and then projects what the pitcher’s W% would be on an average team. I do not place a lot of faith in anything based on wins and losses, of course, and particularly not for a one-year sample. In the long run, we would expect pitchers to pitch for fairly balanced teams and for run support for an individual to be the same as for the pitching staff as a whole. For individual seasons, we know that things are not going to even out.

I used to use Run Support to compare a pitcher’s W% to what he would have been expected to earn, but now I have decided that is more trouble than it is worth. RS can be a pain to run down, and I don’t put a lot of stock in the resulting figures anyway. So why bother? NW% = W% - (Mate + .5)/2 +.5, where Mate is (Team Wins - Pitcher Wins)/(Team Decisions - Pitcher Decisions).

Likewise, I include Quality Start Percentage (which of course is just QS/GS) only because my data source (Doug’s Stats) includes them. As for RAA and RAR for starters, RAA = (N - RA)*IP/9, and RAR = (1.25*N - RA)*IP/9.

For hitters with 300 or more PA, I list Plate Appearances (PA), Outs (O), Batting Average (BA), On Base Average (OBA), Slugging Average (SLG), Runs Created (RC), Runs Created per Game (RG), Secondary Average (SEC), Speed Unit (SU), Hitting Runs Above Average (HRAA), Runs Above Average (RAA), Hitting Runs Above Replacement (HRAR), and Runs Above Replacement (RAR).

I do not bother to include hit batters, so take note of that for players who do get plunked a lot. Therefore, PA are simply AB + W. Outs are AB - H + CS. BA and SLG you know, but remember that without HB and SF, OBA is just (H + W)/(AB + W). Secondary Average = (TB - H + W)/AB. I have not included net steals as many people (and Bill James himself) does--it is solely hitting events.

The park adjustment method I’ve used for BA, OBA, SLG, and SEC deserves a little bit of explanation. It is based on the same principle as the “Willie Davis method” introduced by Bill James in the New Historical Baseball Abstract. The idea is to deflate all of the positive offensive events by a constant percentage in order to make the new runs created estimate from those stats equal to the park adjusted runs created we get from the player’s actual stats. I based it on the run estimator (ERP) that I use here instead of RC.

X = ((TB + .8H + W - .3AB)/PF + .3(AB - H))/(TB + W + .5H)

X is unique for each player and is the deflator. Then, hits, walks, and total bases are all multiplied by X in order to park adjust them. Outs (AB - H) are held constant, so the new At Bat estimate is AB - H + H*X, which can be rewritten as AB - (1 - X)*H. Thus, we can write BA, OBA, SLG, and SEC as:

BA = H*X/(AB - (1 - X)*H)
OBA = (H + W)*X/(AB - (1 - X)*H + W*X)
SLG = TB*X/(AB - (1 - X)*H)
SEC = SLG - BA + (OBA - BA)/(1 - OBA)

Next up is Runs Created, which as previously mentioned is actually Paul Johnson’s ERP. Ideally, I would use a custom linear weights formula for the given league, but ERP is just so darn simple and close to the mark that it’s hard to pass up. I still use the term “RC” partially as a homage to Bill James (seriously, I really like and respect him even if I’ve said negative things about RC and Win Shares), and also because it is just a good term. I like the thought put in your head when you hear “creating” a run better than “producing”, “manufacturing”, “generating”, etc. to say nothing of names like “equivalent” or “extrapolated” runs. None of that is said to put down the creators of those methods--there just aren’t a lot of good, unique names available. Anyway, RC = (TB + .8H + W + .7SB - CS - .3AB)*.322.

RC are park adjusted, by dividing by PF, making all of the value stats that follow park adjusted as well. RG, the rate, is RC/O*25.5. I do not believe that outs are the proper denominator for an individual rate stat, but I also do not believe that the distortions caused are that bad. (I still intend to finish my rate stat series and discuss all of the options in excruciating detail, but alas you’ll have to take my word for it now).

Speed Unit is my own take on a “speed skill” estimator ala Speed Score. I AM NOT CLAIMING THAT IT IS BETTER THAN SPEED SCORE. I don’t use Speed Score because I always like to make up my own crap whenever possible (while of course recognizing that others did it first and better), because some of the categories aren’t readily available, and because I don’t want to mess with square roots. Anyway, it considers four categories: runs per time on base, stolen base percentage (using Bill James’ technique of adding 3 to the numerator and 7 to the denominator), stolen base frequency (steal attempts per time on base), and triples per ball in play. These are then converted to a pseudo Z-score in each category, and are on a 0-100 scale. I will not reprint the formula here, but I have written about it before here. I AM NOT CLAIMING THAT IT IS BETTER THAN SPEED SCORE. I AM NOT CLAIMING THAT IT IS AS GOOD AS SPEED SCORE.

There are a whopping four categories that compare to a baseline; two for average, two for replacement. Hitting RAA compares to a league average hitter; it is in the vein of Pete Palmer’s Batting Runs. RAA compares to an average hitter at the player’s primary position. Hitting RAR compares to a “replacement level” hitter; RAR compares to a replacement level hitter at the player’s primary position. The formulas are:

HRAA = (RG - N)*O/25.5
RAA = (RG - N*PADJ)*O/25.5
HRAR = (RG - .73*N)*O/25.5
RAR = (RG - .73*N*PADJ)*O/25.5

PADJ is the position adjustment, and it is based on 1992-2001 data. For catchers it is .89; for 1B/DH, 1.19; for 2B, .93; for 3B, 1.01; for SS, .86; for LF/RF, 1.12; and for CF, 1.02.

How do I deal with players who split time between teams? I assign all of their statistics to the team with which they played more, even if this means it is across leagues. This is obviously the lazy way out; the optimal thing would be to look at the performance with the teams separately, and then sum them up.

You can stop reading now if you just want to know how the numbers were calculated. The rest of this post will be of a rambling nature and will discuss the underpinnings behind the choices I have made on matters like park adjustments, positional adjustments, run to win converters, and replacement levels.

First of all, the term “replacement level” is obnoxious, because everyone brings their preconceptions to the table about what that means, and people end up talking past each other. Unfortunately, that ship has sailed, and the term “replacement level” is not going away. Secondly, I am not really a believer in replacement level. I don’t deny that it is a valid concept, or that comparisons to replacement level can be useful for answering certain questions. I just don’t believe that replacement level is clearly the correct baseline. I also don’t believe that it’s clearly NOT the correct baseline, and since most sabermetricians use it, I go along with the crowd in this case.

The way that reads is probably too wishy-washy; I do think that it is PROBABLY the correct choice. There are few things in sabermetrics that I am 100% sure of, though, and this is certainly not one of them.

I have used distinct replacement levels for batters, starters, and relievers. For batters, it is 73% of the league RG, or since replacement levels are often discussed in these terms, a .350 W%. For starters, I used 125% of the league RA or a .390 W%. For relievers, I used 111% of the league RA or a .450 W%. I am certainly not positive that any of these choices are “correct”. I do think that it is extremely important to use different replacement levels for starters and relievers; Tango Tiger convinced me of this last year (he actually uses .380, .380, .470 as his baselines). Relievers have a natural RA advantage over starters, and thus their replacements will as well.

Now, park adjustments. Since I am concerned about the player’s value last season, the proper type of PF to use is definitely one based on runs. Given that, there are still two paths you can go down. One is to park adjust the player’s statistics; the other is to park adjust the league or replacement statistics when you plug in to a RAA or RAR formula. I go with the first option, because it is more useful to have adjusted RC or adjusted RA, ERA, etc. than to only have the value stats adjusted. However, given a certain assumption about the run to win converter, the two approaches are equivalent.

Speaking of those RPW: David Smyth, in his Base Wins methodology, uses RPW = RPG. If the RPG is 9.4, then there are 9.4 runs per win. It is true that if you study marginal RPW for teams, the relationship is not linear. However, if you back up from the team and consider things in league context, one can make the case that the proper approach is the simple RPW = RPG.

Given that RPW = RPG, the two park factor approaches are equivalent. Suppose that we have a player in an extreme park (PF = 1.15, approximately like Coors Field) who has a 8 RG before adjusting for park while making 350 outs in a 4.5 N league. The first method of park adjustment, the one I use, converts his value into a neutral park, so his RG is now 8/1.15 = 6.957. We can now compare him directly to the league average:

RAA = (6.957 - 4.5)*350/25.5 = +33.72

The second method would be to adjust the league context. If N = 4.5, then the average player in this park will create 4.5*1.15 = 5.175 runs. Now, to figure RAA, we can use the unadjusted RG of 8:

RAA = (8 - 5.175)*350/25.5 = +38.77

These are not the same, as you can obviously see. The reason for this is that they are in two different contexts. The first figure is in a 9 RPG (2*4.5) context; the second figure is in a 10.35 RPG (2*4.5*1.15) context. Runs have different values in different contexts; that is why we have RPW converters. If we convert to WAA, then we have:

WAA = 33.72/9 = +3.75
WAA = 38.77/10.35 = +3.75

Once you convert to wins, the two approaches are equivalent. This is another advantage for the first approach: since after park adjusting, everyone in the league is in the same context, there is no need to convert to wins at all. Sure, you can convert to wins if you want. If you want to compare to performances from other seasons and other leagues, then you need to. But if all you want to do is compare David Wright to Prince Fielder to Hanley Ramirez, there is no need to convert to wins. Personally, I think that stating something as +34 is a lot nicer than stating it as +3.8, if you can get away with it. None of this is to deny that wins are not the ultimate currency, but runs are directly related to wins, and so there is no difference in conclusion from using them if the RPW is the same for all players, which it is for a given league season coupled with park adjusting runs rather than context.

Finally, there is the matter of position adjustments. What I have done is apply an offensive positional adjustment to set a baseline for each player. A second baseman’s RAA will be figured by comparing his RG to 93% of the league average, while a third baseman’s will compare to 101%, etc. Replacement level is set at 73% of the estimated average for each position.

So what I am doing is comparing to a “replacement hitter at position”. As Tango Tiger has pointed out, there is really no such thing as a “replacement hitter” or a “replacement fielder”--there are just replacement players. Every player is chosen because his total value, both hitting and fielding, is sufficient to justify his inclusion on the team. Segmenting it into hitting and fielding replacements is not realistic and causes mass confusion.

That being said, using “replacement hitter at position” does not cause too many distortions. It is not theoretically correct, but it is practically powerful. For one thing, most players, even those at key defensive positions, are chosen first and foremost for their offense. Empirical work by Keith Woolner has shown that the replacement level hitting performance is about the same for every position, relative to the positional average.

The offensive positional adjustment makes the inherent assumption that the average player at each position is equally valuable. I think that this is close to being true, but it is not quite true. The ideal approach would be to use a defensive positional adjustment, since the real difference between a first baseman and a shortstop is their defensive value. When you bat, all runs count the same, whether you create them as a first baseman or as a shortstop.

Figuring what the defensive positional adjustment should be, though, is easier said than done. Therefore, I use the offensive positional adjustment. So if you want to criticize that choice, or criticize the numbers that result, be my guess. But do not claim that I am holding this up as the correct analytical structure. I am holding it up as the most simple and straightforward structure that conforms to reality reasonably well, and because while the numbers may be flawed, they are at least based on an objective formula. If you feel comfortable with some other assumptions, please feel free to ignore mine.

One other note here is that since the offensive PADJ is a proxy for average defensive value by position, ideally it would be applied by tying it to defensive playing time. I have done it by outs, though. For example, shortstops have a PADJ of .86. If we assume that an average full-time player makes 10% of his team’s outs (about 408 for a 162 game season with 25.5 O/G) and the league has a 4.75 N, the average shortstop is getting an adjustment of (1 - .86)*4.75/25.5*408 = +10.6 runs. However, I am distributing it based on player outs. If you have one shortstop who makes 350 outs and another who makes 425 outs, then the first player will be getting 9.1 runs while the second will be getting 11.1 runs, despite the fact that they may both be full-time players.

The reason I have taken this flawed path is because 1) it ties the position adjustment directly into the RAR formula rather then leaving it as something to subtract on the outside and more importantly 2) there’s no straightforward way to do it. The best would probably be to use defensive innings--set the full-time player to X defensive innings, figure how Derek Jeter’s innings compare to X, and adjust his PADJ accordingly. Games in the field or games played are dicey because they can cause distortion for defensive replacements. Plate Appearances avoid the problem that outs have of being highly related to player quality, but they still have the illogic of basing it on offensive playing time. And of course the differences here are going to be fairly small (a few runs). That is not to say that this way is preferable, but it’s not horrible either, at least as far as I can tell.

Given the inherent assumption of the offensive PADJ that all positions are equally valuable, once we have a player’s RAR, we should account for his defensive value by adding on his runs above average relative to a player at his own position. If there is a shortstop out there who is -2 runs defensively versus an average shortstop, he is without a doubt a plus defensive player, and a more valuable defensive player than a first baseman who was +1 run better than an average first baseman. Regardless, since we have implicitly assumed that they are both average defensively for their position when RAR was calculated, the shortstop will see his value docked two runs. This DOES NOT MEAN that the shortstop has been penalized for his defense. The whole process of accounting for positional differences, going from hitting RAR to positional RAR, has benefited him.

It is with some misgivings that I publish “hitting RAR” at all, since I have already stated that there is no such thing as a replacement level hitter. It is useful to provide a low baseline total offensive evaluation that does not include position, though, and it can also be thought of as the theoretical value above replacement in a world in which nobody plays defense at all.

The DH is a special case, and it caused a lot of confusion when my MVP post was linked at BTF last year. Some of that confusion has to do with assuming that any runs above replacement methodology is the same as VORP from the Baseball Prospectus. Obviously there are similarities between my approach and VORP, but there also key differences. One key difference is that I use a better run estimator. Simple, humble old ERP is, in my opinion, a superior estimator to the complex MLV. I agree with almost all of the logic behind MLV--but using James’ Runs Created as the estimator to fuel it is putting lipstick on a pig.

The big difference, though, as it relates to the DH, is that VORP considers the DH to be a unique position, and I consider DHs as in the same pool as first baseman. The fact of the matter is that first baseman outhit DH. There are any number of potential explanations for this; DHs are often old or injured, hitting as a DH is harder than hitting as a position player, etc. Anyway, the exact procedure for VORP is propriety, but it is apparent that they use some sort of average DH production to set the DH replacement level. This makes the replacement level for a DH lower than the replacement level for a first baseman.

A couple of the aforementioned nimrods took the fact that VORP did this and assumed that my figures did as well. What I do is evaluate 1B and DH against the same replacement RG. This actually helps first baseman, since the DHs drag the average production of the pool down, thus resulting in a lower replacement level than I would get if I considered first baseman on their own. Contrary to what the chief nimrod thought, this is not “treating a 1B as a DH”. It is “treating a 1B as a 1B/DH”.

It is true, however, that this method assumes that a 1B and a DH have equal defensive value. Obviously, a DH has no defensive value. What I advocate to correct this is to treat a DH as a bad defensive first baseman, and thus knock another five or ten runs off of his RAR for a full-time player. I do not incorporate this into the published numbers, but you should keep it in mind. However, there is no need to adjust the figures for first baseman upwards, despite what the nimrods might think. The simple fact of the matter is that first baseman get higher RAR figures by being pooled with the DHs than they would otherwise.

2007 Park Factors

2007 Leagues

2007 Teams

2007 AL Relievers

2007 NL Relievers

2007 AL Starters

2007 NL Starters

2007 AL Hitters


2007 NL Hitters

6 comments:

  1. Thanks for the data. I'm not able to access the 2007 Teams sheet.

    ReplyDelete
  2. Thanks, it should be fixed now.

    ReplyDelete
  3. Can you explain the park factors a bit more. When I copy the data from the GoogleDoc, I get additional columns which imply the data's from multiple seasons. How many? How are the seasons weighted?

    ReplyDelete
  4. Cool, I didn't realize that if you copied you would get all the hidden columns.

    The PFs are five years (when applicable, of course), equally weighted, regressed towards 1, and

    Let me walk through a sample calculation. The Rockies and their opponents over the last 5 yrs have averaged 11.42 runs/game in Coors and 9.16 on the road. The initial factor is 16*11.42/(15*9.16 + 11.42) = 1.228. The "16" and "15" weights reflect the fact that the "neutral" context is actually 15/16 road and 1/16 Coors, since everyone plays some games there (of course, with the unbalanced schedule, this is not precise, as you don't play equally in each park).

    Then, to covert it into a straight adjustment factor, we have to account for the fact that 1/2 the games are at home and 1/2 on the road, and so we do (1.228 + 1)/2 = 1.114.

    Finally, I regress that towards one, based on regression factors posted by MGL several years ago (.6 for 1 yr of data, .7 for 2, ..., .9 for 4+). So the final PF will be 90% of 1.114 and 10% of 1, or 1.103, which I round to the second decimal place for 1.10.

    ReplyDelete
  5. You're lucky you didn't have your credit card info in a hidden column.

    So all five years are weighted equally? If you were to do an analysis of 2003, would you use the years 1999 to 2003 or 2001 to 2005?

    If I wanted to weight the away parks exactly according to the unbalanced schedule, I'd do that in the "initial factor" -- where the 15*whatever term is located, right? Why is the final environment adjustment (1.2+1)/2 -- shouldn't the 1 really be the away park factor, excluding Coors?

    ReplyDelete
  6. Yes, all five years are equally weighted. Here I use, of course, the last five years, but in the future, I would use the 2 years on either side (so for 2003, 2001-2005) when applicable, but five years if at all possible.

    If I was going to do it exactly, what I would do is find the simple ratio for each team (11.42/9.16 for the Rockies). Then if they played 162 games, I would do (81/162)*11.42/9.16 + (games played in ARI/162)*ARI factor + (games played in SF/162)*SF factor + ...

    As for the "+1", yes, it should really be the road pf. So that would be (16-1.228)/15 = .9848, and the new factor would be (.9848+1.228)/2 = 1.1064. When you regress that and round to two decimal places, you get 1.10. I don't sweat the small stuff in this instance because by the time you regress and truncate to two decimal places, it makes very little difference (a couple parks move by one point).

    ReplyDelete

Comments are moderated, so there will be a lag between your post and it actually appearing. I reserve the right to reject any comment for any reason.